- Home
- QSFP+ Transceivers
- 400G QSFP-DD
- 400G QSFP-DD DR4
400G QSFP-DD DR4
QSFP-DD DR4, 4x100G Optical transceiver module are designed for use in 400 Gigabit links over 500m singlemode fiber.
400G QSFP-DD
The 400G QSFP-DD Transceiver follows the same port densities system as the QSFP and QSFP28, but the QSFP-DD will support eight lanes instead of four lanes for the QSFP and QSFP28, which double the density.
400G QSFP-DD DR4
Showing 1 to 12 (of 12 results)
The 400GBASE-XDR4 Module supports link lengths of up to 2km parallel SMF with MTP/MPO-12 connector. The 400 Gigabit Ethernet signal is carried over four parallel lanes by one...
The QSFP-DD form factor provides an 8-lane electrical interface, increasing bandwidth, channel capacity and port density. The module converts 8 channels of 50 Gbps (PAM4)...
The 400G QSFP-DD FR4 transceiver supports connections of up to 2km over single-mode fiber and uses Duplex LC connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD...
The 400GBASE-XDR4 Module supports link lengths of up to 2km parallel SMF with MTP/MPO-12 connector. The 400 Gigabit Ethernet signal is carried over four parallel lanes by one...
The QSFP-DD form factor provides an 8-lane electrical interface, increasing bandwidth, channel capacity and port density. The module converts 8 channels of 50 Gbps (PAM4)...
The 400G QSFP-DD FR4 transceiver supports connections of up to 2km over single-mode fiber and uses Duplex LC connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD...
The QSFP-DD form factor provides an 8-lane electrical interface, increasing bandwidth, channel capacity and port density. The module converts 8 channels of 50 Gbps (PAM4)...
The 400G QSFP-DD FR4 transceiver supports connections of up to 2km over single-mode fiber and uses Duplex LC connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD...
The 400GBASE-XDR4 Module supports link lengths of up to 2km parallel SMF with MTP/MPO-12 connector. The 400 Gigabit Ethernet signal is carried over four parallel lanes by one...
The QSFP-DD form factor provides an 8-lane electrical interface, increasing bandwidth, channel capacity and port density. The module converts 8 channels of 50 Gbps (PAM4)...
The 400G QSFP-DD FR4 transceiver supports connections of up to 2km over single-mode fiber and uses Duplex LC connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD...
The 400GBASE-XDR4 Module supports link lengths of up to 2km parallel SMF with MTP/MPO-12 connector. The 400 Gigabit Ethernet signal is carried over four parallel lanes by one...
Copyright © 2025 Powered by Fibersum.com Inc. All Rights Reserved.
